factory Outlets for G11 Fiberglass - 3242 Epoxy Glassfiber Laminated Sheet – Xinxing
factory Outlets for G11 Fiberglass - 3242 Epoxy Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
Features
1.Good electrical stability under high humidity;
2.High mechanical strength under high temperature; 3.Moisture resistance;
4.Heat resistance;
5.Temperature resistance:Grade F,155℃
Compliance With Standards
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | ||
| 01 | Density | g/cm³ | 1.8-2.0 | ||
| 02 | Water absorption | % | <0.5 | ||
| 03 | Vertical bending strength | Normal | MPa | ≥340 | |
| 150±2℃ | ≥170 | ||||
| 04 | Impact strength（Charpy type） | Gap | KJ/m² | ≥33 | |
| 05 | Parallel shear strength | MPa | ≥30 | ||
| 06 | Tensile strength | Lengthways | MPa | ≥300 | |
| 07 | Vertical electric strength（in oil of 90℃±2℃） | 1mm | MV/m | ≥14.2 | |
| 2mm | |||||
| ≥11.8 | |||||
| 3mm | |||||
| ≥10.2 | |||||
| 08 | Parallel breakdown voltage（in oil of90℃±2℃） | KV | ≥35 | ||
| 09 | Relative dielectric constant（50Hz) | - | ≤5.5 | ||
| 10 | dielectric dissipation factor（50Hz) | - | ≤0.04 | ||
| 11 | Parallel insulation resistance | Normal | MΩ | ≥5.0×105 | |
| After soaking for 24 hours | ≥5.0×104 | ||||
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for factory Outlets for G11 Fiberglass - 3242 Epoxy Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: San Diego, Sevilla, Ghana, Besides there are also experienced production and management , advanced production equipment to assure our quality and delivery time , our company pursues the principle of good faith, high-quality and high-efficiency. We guarantee that our company will try our best to reduce customer purchase cost, shorten the period of purchase, stable solutions quality, increase customers' satisfaction and achieve win-win situation .
By Helen from Russia - 2017.09.22 11:32
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Klemen Hrovat from Netherlands - 2017.02.18 15:54
