Factory Outlets G10 Board - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing
Factory Outlets G10 Board - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with modified diphenyl ether resin as binder.It has high mechanical strength under high temeprature,good dielectric stability under high humidity.Good radiation resistanceit ,suitable for class H motor,electrical equipment as the insulation structure parts.
Features
1.High mechanical strength under high temperature;
2.Good electrical stability under high moisture;
3.High heat resistance;
4.High moisture resistance;
5.Good machinability;
6.Good radiation resistance
7.Temperature resistance:Grade H,180℃
Compliance With Standards
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for class H motor,electrical equipment as the insulation structure parts.
Main Performance Index
NO. | ITEM | UNIT | INDEX VALUE | |
01 | Density | g/cm³ | ≥1.75 | |
02 | Water absorption | % | <0.5 | |
03 | Vertical bending strength | Normal | MPa | ≥340 |
180±2℃ | ≥170 | |||
05 | Parallel impact strength(Charpy type) | KJ/m² | ≥33 | |
06 | Tensile strength | MPa | ≥294 | |
07 | Vertical electric strength(in oil of 90℃±2℃) | 1mm | MV/m | ≥20 |
2mm | ||||
≥18 | ||||
3mm | ||||
≥16 | ||||
08 | Parallel breakdown voltage(in oil of 90℃±2℃) | KV | ≥22 | |
09 | Relative dielectric constant(50Hz) | - | ≤5.5 | |
10 | Dielectric dissipation factor(50Hz) | - | ≤0.04 | |
11 | Surface insulation resistance | Normal | Ω | ≥1.0×1013 |
After soaking for 24 hours | ≥1.0×1010 | |||
12 | Volume resistivity | Normal | Ω
|
≥1.0×1011 |
≥1.0×109 | ||||
After soaking for 24 hours | ||||
180±2℃ | ||||
≥1.0×108 |
Product detail pictures:

Related Product Guide:
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Factory Outlets G10 Board - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: British, India, kazan, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.

Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
