Factory Supply Electrical Insulation Board - 3242 Epoxy Glassfiber Laminated Sheet – Xinxing
Factory Supply Electrical Insulation Board - 3242 Epoxy Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
Features
1.Good electrical stability under high humidity;
2.High mechanical strength under high temperature; 3.Moisture resistance;
4.Heat resistance;
5.Temperature resistance:Grade F,155℃
Compliance With Standards
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | ||
| 01 | Density | g/cm³ | 1.8-2.0 | ||
| 02 | Water absorption | % | <0.5 | ||
| 03 | Vertical bending strength | Normal | MPa | ≥340 | |
| 150±2℃ | ≥170 | ||||
| 04 | Impact strength（Charpy type） | Gap | KJ/m² | ≥33 | |
| 05 | Parallel shear strength | MPa | ≥30 | ||
| 06 | Tensile strength | Lengthways | MPa | ≥300 | |
| 07 | Vertical electric strength（in oil of 90℃±2℃） | 1mm | MV/m | ≥14.2 | |
| 2mm | |||||
| ≥11.8 | |||||
| 3mm | |||||
| ≥10.2 | |||||
| 08 | Parallel breakdown voltage（in oil of90℃±2℃） | KV | ≥35 | ||
| 09 | Relative dielectric constant（50Hz) | - | ≤5.5 | ||
| 10 | dielectric dissipation factor（50Hz) | - | ≤0.04 | ||
| 11 | Parallel insulation resistance | Normal | MΩ | ≥5.0×105 | |
| After soaking for 24 hours | ≥5.0×104 | ||||
Product detail pictures:
Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for Factory Supply Electrical Insulation Board - 3242 Epoxy Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Benin, Suriname, Monaco, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Heloise from Zambia - 2018.11.22 12:28
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Tom from Singapore - 2017.02.14 13:19
