High Quality Cutting Laminate Sheets - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing
High Quality Cutting Laminate Sheets - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with modified diphenyl ether resin as binder.It has high mechanical strength under high temeprature,good dielectric stability under high humidity.Good radiation resistanceit ,suitable for class H motor,electrical equipment as the insulation structure parts.
Features
1.High mechanical strength under high temperature;
2.Good electrical stability under high moisture;
3.High heat resistance;
4.High moisture resistance;
5.Good machinability;
6.Good radiation resistance
7.Temperature resistance:Grade H
Compliance With Standards
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for class H motor,electrical equipment as the insulation structure parts.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | ||
| 1 | Density | g/cm³ | 1.8-2.0 | ||
| 2 | Water absorption Rate | % | ≤0.5 | ||
| 3 | Vertical bending strength | Normal | MPa | ≥340 | |
| 180±5℃ | ≥170 | ||||
| 4 | Compression strength | Vertical | MPa | ≥350 | |
| 5 | Impact strength (charpy type) | gap | KJ/m² | ≥33 | |
| 6 | Bonding strength | N | ≥5700 | ||
| 7 | Tensile strength | Lengthway | MPa | ≥300 | |
| 8 | Vertical electric strength （in oil of 90℃±2℃） |
1mm | KV/mm | ≥20.0 | |
| 2mm | ≥18.0 | ||||
| 3mm | ≥16.0 | ||||
| 9 | Parallel breakdown voltage(1 min in oil of 90℃±2℃） | KV | ≥30 | ||
| 10 | Dielectric dissiption factor（50Hz) | - | ≤0.04 | ||
| 11 | Parallel Insulation Resistance | Normal | Ω | ≥1.0×1013 | |
| After soaking for 24hours | ≥1.0×1010 | ||||
| 12 | Volumn Insulation Resistance | Normal | Ω.m | ≥1.0×1011 | |
| After soaking for 24hours | ≥1.0×109 | ||||
| 180±5℃ | ≥1.0×108 | ||||
Product detail pictures:
Related Product Guide:
Our corporation has been specializing in brand strategy. Customers' gratification is our greatest advertising. We also source OEM company for High Quality Cutting Laminate Sheets - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Cyprus, Cancun, Singapore, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Beatrice from Norway - 2017.12.09 14:01
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Pamela from Puerto Rico - 2017.12.02 14:11
