Manufacturer for Fiberglass Sheets 4×8 - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing

Short Description:

Product Detail

Product Tags

Feedback (2)

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for Laminated Board Board , Phenolic Resin Sheet , Fiberglass Insulation Sheets , We sincerely welcome overseas consumers to consult for your long-term cooperation as well as the mutual advancement.We strongly think that we will do superior and far better.

Manufacturer for Fiberglass Sheets 4×8 - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing Detail:

Product Description

This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with modified diphenyl ether resin as binder.It has high mechanical strength under high temeprature,good dielectric stability under high humidity.Good radiation resistanceit ,suitable for class H motor,electrical equipment as the insulation structure parts.

Features

1.High mechanical strength under high temperature;
2.Good electrical stability under high moisture;
3.High heat resistance;
4.High moisture resistance;
5.Good machinability;
6.Good radiation resistance
7.Temperature resistance:Grade H

Compliance With Standards

In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.

Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.

Application

Suitable for class H motor,electrical equipment as the insulation structure parts.

Main Performance Index

NO.	ITEM		UNIT	INDEX VALUE
1	Density		g/cm³	1.8-2.0
2	Water absorption Rate		%	≤0.5
3	Vertical bending strength	Normal	MPa	≥340
3	Vertical bending strength	180±5℃	MPa	≥170
4	Compression strength	Vertical	MPa	≥350
5	Impact strength (charpy type)	gap	KJ/m²	≥33
6	Bonding strength		N	≥5700
7	Tensile strength	Lengthway	MPa	≥300
8	Vertical electric strength （in oil of 90℃±2℃）	1mm	KV/mm	≥20.0
		2mm		≥18.0
		3mm		≥16.0
9	Parallel breakdown voltage(1 min in oil of 90℃±2℃）		KV	≥30
10	Dielectric dissiption factor（50Hz)		-	≤0.04
11	Parallel Insulation Resistance	Normal	Ω	≥1.0×1013
11	Parallel Insulation Resistance	After soaking for 24hours	Ω	≥1.0×1010
12	Volumn Insulation Resistance	Normal	Ω.m	≥1.0×1011
		After soaking for 24hours	Ω.m	≥1.0×109
		180±5℃		≥1.0×108

Product detail pictures:

Related Product Guide:

All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for Manufacturer for Fiberglass Sheets 4×8 - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Cyprus, Canada, Guatemala, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.

Anti Static Board