Short Lead Time for Transparent Fiber Board - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing

Short Description:

Product Detail

Product Tags

Feedback (2)

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Electrical Panel Insulation , G11 Fr5 , Epoxy Glass Board , We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.

Short Lead Time for Transparent Fiber Board - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing Detail:

Product Description

This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with modified diphenyl ether resin as binder.It has high mechanical strength under high temeprature,good dielectric stability under high humidity.Good radiation resistanceit ,suitable for class H motor,electrical equipment as the insulation structure parts.

Features

1.High mechanical strength under high temperature;
2.Good electrical stability under high moisture;
3.High heat resistance;
4.High moisture resistance;
5.Good machinability;
6.Good radiation resistance
7.Temperature resistance:Grade H

Compliance With Standards

In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.

Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.

Application

Suitable for class H motor,electrical equipment as the insulation structure parts.

Main Performance Index

NO.	ITEM		UNIT	INDEX VALUE
1	Density		g/cm³	1.8-2.0
2	Water absorption Rate		%	≤0.5
3	Vertical bending strength	Normal	MPa	≥340
3	Vertical bending strength	180±5℃	MPa	≥170
4	Compression strength	Vertical	MPa	≥350
5	Impact strength (charpy type)	gap	KJ/m²	≥33
6	Bonding strength		N	≥5700
7	Tensile strength	Lengthway	MPa	≥300
8	Vertical electric strength （in oil of 90℃±2℃）	1mm	KV/mm	≥20.0
		2mm		≥18.0
		3mm		≥16.0
9	Parallel breakdown voltage(1 min in oil of 90℃±2℃）		KV	≥30
10	Dielectric dissiption factor（50Hz)		-	≤0.04
11	Parallel Insulation Resistance	Normal	Ω	≥1.0×1013
11	Parallel Insulation Resistance	After soaking for 24hours	Ω	≥1.0×1010
12	Volumn Insulation Resistance	Normal	Ω.m	≥1.0×1011
		After soaking for 24hours	Ω.m	≥1.0×109
		180±5℃		≥1.0×108

Product detail pictures:

Related Product Guide:

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Short Lead Time for Transparent Fiber Board - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Canada, Manila, Finland, Our items have been obtained more and more recognition from foreign clients, and established long term and cooperative relationship with them. We`ll supply the best service for every customer and sincerely welcome friends to work with us and establish the mutual benefit together.

12mm Fiberglass Sheet